Trampoline sets from G-Force Trampolines buy trampolines online

Trampoline sets from G-Force Trampolines, including trampoline enclosures, camouflage trampolines and all accessories

View Cart

Shopping Cart (0 Items)

Call Us Now! 0845 2000 258

or click here

Free Next Day Delivery! UK Mainland Only

Trampolines Sets

Sport Sets

Camouflage Sets

Rectangular Sets

10ft x 7ft Camouflage Set

Trampoline Enclosures

8ft Trampoline Enclosure

10ft Trampoline Enclosure

12ft Trampoline Enclosure

14ft Trampoline Enclosure

Accessory Packs

Trampoline Anchor Kit

Thank you so much for all your help. I'm very happy with the Trampoline and so is my Daughter. It's excellent! It's made her Birthday even more Special.

Thanks Again and Look forward to doing business in the Future.

Trampoline Assembly

These assembly instructions are for the G-Force Round Trampolines only

Two adults are required to assemble the trampoline, remember to use gloves during assembly to avoid pinching.

FRAME LAYOUT
First check that you have received all parts using the instruction manual included with your trampoline set.
All parts with the same part number are interchangeable and do not have �right� or �left� orientation.
To connect the parts, simply slide a section of tubing into the adjacent section.
These joints are called �T shape section�.

SUPPORT ASSEMBLY
Insert T-section (#4) into one end of top rail (#3).
Ensure the hole in the T-section matches the hole in the rail. Use a rubber mallet if necessary.
Use the spring hook tool provided to help you spread the T-section if necessary.
Repeat for the other T-sections, but do not connect the top rail sections together yet.

Fit the leg tubes (#6) onto the T-sections using the spring hook tool to compress the T-section.
The T-sections must be fitted to the wider end of the leg tubes.
Take care not to pinch your fingers when compressing the T-sections.

Connect two top rail sections together.
Repeat for the other top rail sections as shown in figure 3.

Fit the W-shape tube (#5) onto the leg tubes (#6) as shown in figure 4.
Fit the remaining tubes (#5) on to the rest of the leg tubes.

Turn over the 4 part-assembled sections and connect them together.
Note that at this stage the sections can still be parted.
The assembly will become rigid only when the trampoline mat is assembled.

The completed trampoline skeleton should be the same as figure 6.

IMPORTANT - It is essential that the intended site for this trampoline is completely flat and level.

TRAMPOLINE MAT ASSEMBLY
Take care when attaching springs to the trampoline mat. You will need another person to help you with this part of the assembly.

The best way to put the jumping mat onto the trampoline frame is to treat it like a clock.
Put the first spring in at 12 o�clock, the second spring in at 6 o�clock, the third spring in at 3 o�clock and the fourth spring in at 9 o�clock.
Then infill the gaps, but still working at opposites, so 1 o�clock is then followed by 7 o�clock and so on.

SAFETY PLACARD ATTACHMENT
Using the tie wrap, attach the Safety Instruction Placard to the trampoline.
The tie wrap should go around the Vertical Frame joint and the Top Rail to ensure it remains attached.

FRAME PADDING ASSEMBLY
Turn the Frame Pad upside down and insert all the foam pads.
Turn the padding back over and put onto the trampoline so that the springs and the steel frame are covered.
Simply hook the black clips under the frame and onto the trampoline to secure.