Shopping Cart (0 Items)
Trampolines Sets
Sport Sets
Camouflage Sets
Rectangular Sets
Trampoline Enclosures
Accessory Packs
I received delivery of the trampoline @ 11.30am today. It was a pleasure to deal with you with such prompt service and delivery and I am sure to make our daughter’s birthday an absolute delight!!!!!
A shining example of overall customer service from G-Force Trampolines and thanks again.
Kind regards
A shining example of overall customer service from G-Force Trampolines and thanks again.
Kind regards
Enclosure Assembly
CONTENTS
| Number | Description | 8 ft (3 Legs) |
10ft – 14ft (4 Legs) |
| 1 | Steel Pipe | 6 pieces | 8 pieces |
| 2 | Steel Pipe | 6 pieces | 8 pieces |
| 3 | Steel Jig | 12 pieces | 16 pieces |
| 4 | Screw Set | 24 pieces | 32 pieces |
| 5 | Safety Net | 1pc | 1pc |
| 6 | Spacer | 12 pieces | 16 pieces |
| 7 | Pole Cover | 6 pieces | 8 pieces |
| 8 | Cap | 6 pieces | 8 pieces |
| Number | Description | |
| 1 | Steel Pipe |  |
| 2 | Steel Pipe |  |
| 3 | Steel Jig |  |
| 4 | Screw Set |  |
| 5 | Safety Net |  |
| 6 | Spacer |  |
| 7 | Pole Cover |  |
| 8 | Cap |  |
STEP 1
Connect the two sections of support pipes together, put the end cap on and then slide over the fabric sleeve.
STEP 2
The support poles should reach the base of the trampoline legs.
Each upright is attached to the trampoline leg using two sets of secure bolts.
Use two sets of steel jigs, spacers and screw sets to attach the support poles securely to the trampoline, as in diagram A1 and A2.
For safety purposes, please ensure that the screw sets are on the inside of the legs, under the trampoline.
Each upright is attached to the trampoline leg using two sets of secure bolts.
Use two sets of steel jigs, spacers and screw sets to attach the support poles securely to the trampoline, as in diagram A1 and A2.
For safety purposes, please ensure that the screw sets are on the inside of the legs, under the trampoline.
Once the uprights are in place, your trampoline should look like this.
STEP 3
Stretch the trampoline safety net out (#5).
Locate the panel with the doorway and align the net as to where you would like to get in and out of the trampoline.
The edge with the pre-sewn hanging loop is the upper part of the net and will be hooked at the top of the pole. (See B1 and B2)
Locate the panel with the doorway and align the net as to where you would like to get in and out of the trampoline.
The edge with the pre-sewn hanging loop is the upper part of the net and will be hooked at the top of the pole. (See B1 and B2)
STEP 4
Your trampoline safety enclosure will have a plastic clip at the bottom of the net.
This goes over the padding and under the trampoline frame and then hooks onto the v rings.
This goes over the padding and under the trampoline frame and then hooks onto the v rings.
STEP 5
Working clockwise, hook the clips onto the v-rings as below.
STEP 6
When the trampoline safety net is up, you will need a little more force to ensure that the net is pulled down tight.
IMPORTANT WARNING!!
YOU SHOULD NOW GO BACK AND PULL ALL THE ATTACHMENT HOOKS TIGHT AND DOUBLE CHECK TO SEE WHETHER YOU HAVE TIGHTENED UP THE JIGS AND SCREW SETS PROPERLY. THE SAFETY NET MUST BE TAUGHT, OTHERWISE IT WILL NOT FUNCTION PROPERLY.
Home | Products | Customer Service | Comparisons | Company | Delivery | How to Order | My Account | Testimonials | Contact Us | Sitemap
Warranty | Spare Parts | Weight Limits | Quality | Top Tips | Certifications
Top quality trampoline sets from G-Force Trampolines, including trampoline enclosures, camouflage trampolines and all accessories
© Copyright 2007 G-ForceTrampolines.com. All Rights Reserved. Report a bug | Designed @ Pulse Solutions | SEO: on1.com
