Make sure there are no underground utilities like electrics, gas, phone, or water before installing the stakes. This trampoline anchor kit should be installed by an adult.

Each tie down strap consists of two loop straps that are joined with steel toothed buckles. The large loop hooks around the trampoline top frame and the bottom leg, ensuring that the legs do not drop off when the trampoline is being moved around the garden. Put the strap end through the buckles and “cinch” together by tightening the strap.

The small loop goes through the stake “ring” and fixes the trampoline to the ground with stakes.

The end of each loop strap is threaded through the buckle as shown. The strap comes “up” through the non “toothed” opening and back through the “toothed” opening.
The sliding piece on the buckle applies or releases tension on the strap end.

Select a suitable position near each foot and rotate the stakes into the ground. To fix the stakes into the ground, it may be necessary to use a straight tool such as a screw driver placed through the stake “eye” to form a “T” shaped handle to assist in rotating the stakes. After installing the stakes, put the end of the small loop through the stake “eye” and buckle and cinch together as mentioned method above.